TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 651 of 1434
TM 9-2320-366-34-2 12-3. STEERING GEAR ASSEMBLY ADJUSTMENT This task covers: a. Adjustment INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Trestle, Motor Vehicle Maintenance (2) (Item 81, Appendix B) Pan, Drain (Item 43, Appendix B) STE/ICE-R (Item 70, Appendix B) Crowfoot, Attachment (Item 17, Appendix B) Gage, Steering Stop Shim (2) (Item 22, Appendix D) Jack, Dolly Type Hydraulic (2) (Item 37, Appendix B) Materials/Parts Coupling, Pipe (Item 24, Appendix C) Tee, Pipe to Tube (Item 86, Appendix C) Lubricating Oil, Engine (Item 45, Appendix C) Ties, Cable, Plastic (Item 92, Appendix C) Personnel Required (2) References: TM 9-4910-571-12 & P a. Adjustment. (1) Remove two screws (1) and washers (2) from front grille (3). (2) Remove screw (4), washer (5), and front grille (3) from cab (6). NOTE Step (3) and (4) require the aid of an assistant. (3) Raise front axle (7) until wheels are off ground. (4) Place two trestles under front axle (7). 12-9