TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 647 of 1434

TM 9-2320-366-34-2 (17) Remove supply port adapter (5) from steering gear assembly (14). (18) Remove nut (23) and steering pitman arm (24) from output shaft (25). (19) Remove steering gear assembly (14) from vise. b. Installation. (1) Position steering gear assembly (1) in vise. CAUTION Ensure marks on steering gear output shaft and pitman arm are aligned. Failure to comply may result in damage to equipment. (2) Install steering pitman arm (2) on output shaft (3). (3) Position nut (4) on output shaft (3). (4) Tighten nut (4) to 365-446 lb-ft (495-605 N m). (5) Stake nut (4) to output shaft (3) at a minimum depth of 0.1 in. (2.5 mm). (6) Install supply port adapter (5) in steering gear assembly (1). 12-5