TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 638 of 1434
TM 9-2320-366-34-2 11-2. AIR COMPRESSOR REPLACEMENT (CONT) b. Installation. (1) Place air compressor (1) in vise. (2) Position spur gear (2) on air compressor (1) with washer (3) and nut (4). (3) Tighten nut (4) to 107-129 lb-ft (145-175 N·m). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (4) Apply sealing compound to threads of two fittings (5) and 45-degree fitting (6). (5) Install two fittings (5) in air compressor (1). (6) Install 45-degree fitting (6) in air compressor (1). (7) Apply sealing compound to threads of 90-degree fittings (7, 8, and 9). (8) Install 90-degree fittings (7, 8, and 9) in air compressor (1). (9) Apply sealing compound to threads of adapter (10). (10) Install adapter (10) in air compressor (1). 11-6