TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 634 of 1434
TM 9-2320-366-34-2 Section II. MAINTENANCE PROCEDURES 11-2. AIR COMPRESSOR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Power steering pump removed (TM 9-2320-366-20-4). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Pan, Drain (Item 43, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Vise, Machinist (Item 82, Appendix B) Caps, Vise Jaw (Item 12, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Antifreeze (Item 11, Appendix C) Sealing, Compound (Item 72, Appendix C) Nut, Self-Locking (Item 214, Appendix F) Gasket (Item 51, Appendix F) Personnel Required (2) a. Removal. (1) Remove radiator cap (1) from radiator overflow tank (2). (2) Position drain pan under radiator draincock (3). (3) Drain approximately 15-20 qt (14-19 L) of coolant from radiator (4). (4) Close radiator draincock (3) on radiator (4). (5) Loosen hose clamp (5) on air hose (6). (6) Disconnect air hose (6) from 45-degree fitting (7). (7) Disconnect air hose (8) from 90-degree fitting (9). (8) Disconnect coolant hose (10) from 90-degree fitting (11). 11-2 Change 1