TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 630 of 1434
TM 9-2320-366-34-2 10-60.2 Change 2 10-9. REAR AXLE DIFFERENTIAL CARRIER REPLACEMENT (CONT) (6) Position five washers (4) and bolts (5) in rear axle differential carrier (1). (7) Tighten 12 bolts (5) to 74-96 lb-ft (100-130 N•m). (8) Remove drive shaft (6) from frame (7). WARNING CAUTION Check bearing cups to ensure all needle bearing are in place prior to installation. Replace bearing cups if needle bearings are missing or out of place. Failure to comply may result in damage to equipment. Do not use steel hammers to seat bearing cups in drive yokes. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Wipe end of yoke bearing bore prior to installation. • Step (8) requires the aid of an assistant.