TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 609 of 1434
TM 9-2320-366-34-2 (6) Install pin (4) on rear differential carrier (5). (7) Position V-rod control arm mounting plate (6) on rear differential carrier (5) with four bolts (7). (8) Tighten four bolts (7) to 398-486 lb-ft (540-659 N m). (9) Position bolt (8) and washer (9) in clevis assembly (10). (10) Tighten bolt (8) to 60-90 lb-ft (81-122 N·m). NOTE Left and right side springs are installed the same way. Right side shown. (11) Position four bolts (11) in spring (12). (12) Tighten four bolts (11) to 43-51 lb-ft (58-69 N·m). (12.1) Perform steps (11) and (12) on left side spring. Change 1 10-47