TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 607 of 1434
TM 9-2320-366-34-2 NOTE Left and right side spring mounts and brackets are removed the same way. Right side shown. (56) Remove spring mount (64) from rear axle assembly (14). (57) Remove pin (65) from rear axle assembly (14). (58) Remove two self-locking nuts (65.1), bolts (65.2), and bracket (65.3) from rear axle assembly (14). Discard self-locking nuts. (59) Perform steps (56) through (58) on left side spring mount and bracket. NOTE Perform steps (60) and (61) on replacement rear axle assembly. (60) Remove 10 protective covers (66) from rear axle assembly (14). (61) Remove nuts (67 and 68) and bracket (69) from rear axle assembly (14). NOTE Perform steps (62) and (63) on old rear axle assembly. (62) Install bracket (69) on rear axle assembly (14) with nuts (67 and 68). (63) Install 10 protective covers (66) on rear axle assembly (14). Change 1 10-45