TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 605 of 1434
TM 9-2320-366-34-2 WARNING Rear axle assembly weighs approximately 1580 lbs (717 kgs). Rear axle assembly must be supported on a transmission/ differential lift during removal. Failure to comply may result in injury to personnel or damage to equipment. (45) Position transmission/differential lift under rear axle assembly (14) and secure with chain. NOTE Left and right side lower shock absorber mounts are removed the same way. Right side shown. (46) Remove four bolts (51), washers (52), and lower shock absorber mount (10) from rear axle assembly (14). (47) Remove pin (53) from rear axle assembly (14). (48) Perform steps (45) and (46) on left side lower shock absorber mount. NOTE Left and right side springs are removed the same way. Right side shown. (49) Remove four bolts (54) from spring (55). (50) Perform step (49) on left side spring. Change 1 10-43