TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 597 of 1434
TM 9-2320-366-34-2 Change 2 10-35 (12.1) Tighten four screws (21) to 26-35 lb-ft (35-47 N•m). (13) Tighten four screws (21). (13.1) Tighten four screws (21) to 26-35 lb-ft (35-47 N•m). (13.2)Fold Tabs on four screws (21). (14) Apply lubrication to grease fittings (TM 9- 2320-366-20). CAUTION NOTE Perform the following steps on kits equipped with screws P/N C5H5-24-39. NOTE • Perform the following step on kits equipped with shearhead screws. • Alternately tighten screws • When correct torque is reached, bearing cup small screw hex head will break off. NOTE Perform the following two steps on bearing cups equipped with tabs. Grease must flow from all four seals. Failure to comply may result in damage to equipment.