TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 594 of 1434

TM 9-2320-366-34-2 10-34.4 Change 2 10-6. INTERMEDIATE AXLE DIFFERENTIAL CARRIER REPLACEMENT (CONT) (9) Tighten four screws (13). (9.1) Tighten four screws (13) to 26-35 lb-ft (35-47 Nm). (9.2) Fold tabs on four screws (13). (10) Install air hose (14) on fitting (15). NOTE Perform the following step on kits equipped with shearhead screws. Alternately tighten screws When correct torque is reached, bearing cup small screw hex head will break off. NOTE Perform the following two steps on bearing cups equipped with tabs.