TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 592 of 1434

TM 9-2320-366-34-2 10-34.2 Change 2 10-6. INTERMEDIATE AXLE DIFFERENTIAL CARRIER REPLACEMENT (CONT) (1) Position intermediate differential carrier (3) on transmission/differential lift. (2) Position intermediate differential carrier (3) on axle assembly (2) with six washers (4) and screws (5). (3) Remove transmission/differential lift from intermediate differential carrier (3). (4) Position six washers (6) and screws (7) on bottom half of intermediate differential carrier (3). (5) Tighten six screws (5 and 7) to 74-98 lb-ft (100-133 Nm). WARNING Intermediate differential carrier weighs approximately 350 lbs (159 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment.