Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 576 of 1434

TM 9-2320-366-34-2 10-24.2 Change 2 10-3. REAR AXLE BOGIE REPAIR (CONT) (12) Remove three screws (13) and mounting plate (12) from shaft (2). (13) Remove bearing cone (11) from shaft (2). (14) Add or remove ring spacers (8) as required to obtain bearing backlash measurement of 0.002- 0.012 in. (0.05-0.30 mm). (15) Install bearing cone (11) on shaft (2). NOTE Perform steps (13) through (15) if bearing backlash measurement was not 0.002-0.012 in. (0.05-0.30 mm).