TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 572 of 1434
TM 9-2320-366-34-2 10-22.2 Change 2 10-3. REAR AXLE BOGIE REPAIR (CONT) (7) Remove three screws (10) and mounting plate (11) from housing (7). (8) Remove housing (7) and bearing cone (12) from shaft (13). (9) Remove two bearing races (14) from housing (7). (10) Remove bolt (15) from housing (7). (11) Remove ring spacer(s) (16) and sleeve spacer (17) from shaft (13). (12) Remove bearing cone (18) from shaft (13). (13) Remove seal (19) from sleeve spacer (20). Discard seal. (14) Remove sleeve spacer (20) and preformed packing (21) from shaft (13). Discard preformed packing. (15) Remove sleeve spacer (20) and three preformed packings (21) from shaft (13). Discard preformed packing. (16) Remove seal (22) from sleeve spacer (20). Discard seal. NOTE Note position of seals prior to disassembly. NOTE Perform step (14) on vehicles S/N 14,260 or lower. NOTE Perform step (14.1) on vehicles S/N 14,261 or higher.