TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 569 of 1434
TM 9-2320-366-34-2 NOTE • Alternatley tighten screws. • When correct torque is reached, bearing cap small screw hex head will break off. (75) Tighten four screws (74). CAUTION Grease must flow from all four seals. Failure to comply may result in damage to equipment. (76) Apply lubrication to grease fittings (TM 9-2320-366-20). c. Follow-On Maintenance. (1) Install intermediate axle wheels and remove trestles (TM 9-2320-366-10-2). (1.1) Lubricate drive shaft universal joint and slip yoke (TM 9- 2320-366-20-1). (2) Check differential oil level (TM 92320-366-20-3). (3) Operate vehicle and check for unusual noises or vibration (TM 9-2320-366-10-1). (4) Check intermediate axle assembly for air leaks (TM 9- 2320-366-10-1). End of Task. Change 1 10-21