TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 560 of 1434
TM 9-2320-366-34-2 10-2. INTERMEDIATE AXLE ASSEMBLY REPLACEMENT (CONT) WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (18) Apply sealing compound to threads of 45-degree fitting (17). (19) Install 45-degree fitting (17) on intermediate axle assembly (2). (20) Install axle breather hose (18) on fitting (17). NOTE • Perform steps (21) through (39) on M1088 and M1089 and on vehicle serial number 2451 and higher serial numbers. • Left and right side front air chambers are installed the same way. Left side shown. (21) Apply sealing compound to threads of two adapters (19), 90-degree fitting (20), and two 90-degree fittings (21). (22) Install two adapters (19) in front air chamber (22). (23) Install 90-degree fitting (20) in front air chamber (22). (24) Install two 90-degree fittings (21) in adapters (19). 10-14 Change 1