TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 558 of 1434
TM 9-2320-366-34-2 10-2. INTERMEDIATE AXLE ASSEMBLY REPLACEMENT (CONT) (5) Install pin (4) on intermediate differential carrier (5). (6) Position V-rod control arm mounting plate (6) on intermediate differential carrier (5) with four bolts (7). (7) Tighten four bolts (7) to 398-486 lb-ft (540-659 N m). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (8) Apply sealing compound to threads of bolt (8). (9) Position washer (9) and bolt (8) in clevis assembly (10). (10) Tighten bolt (8) to 35-43 lb-ft (48-58 N·m). 10-12