TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 547 of 1434

TM 9-2320-366-34-2 Change 2 10-3 (5) Lift tabs from two bearing cups (8). (5.1) Remove four screws (7) and two bearing cups (8) from drive yoke (9). Discard screws. (6) Slide drive shaft (10) from side to side and separate universal joint (11) from drive yoke (9). (7) Attach drive shaft (10) to frame (6). (8) Remove differential air shift hose (12) from 45- degree fitting (13). (9) Remove 45-degree fitting (13) from intermediate differential carrier (14). (10) Remove two nuts (15), bolts (16) and bracket (17) from intermediate axle assembly (18). (11) Remove nut (19), washer (20) and bolt (21) from lower shock absorber mount (22). (12) Remove shock absorber (23) from lower shock absorber mount (22). (13) Perform steps (10) and (11) on right side shock absorbers. NOTE Step (7) requires the aid of an assistant. NOTE Left and right side shock absorbers are removed the same way. Left side shown. NOTE Perform step (5) on bearing cups with tabs.