TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 535 of 1434
TM 9-2320-366-34-2 Change 2 9-21 (9.1) Tighten four screws (11) to 26-36 lb-ft (35-47 N•m) (9.2) Fold tabs on four screws (11). (10) Apply lubrication to grease fittings (TM 9-2320-366- 20). c. Follow-On Maintenance. (1) Check differential oil level (TM 9-2320-366-20). (2) Lubricate drive shaft universal joint and slip yoke (TM 9- 2320-366-20-1). (3) Operate vehicle and check differential for proper operation (TM 9-2320-366-10-1). (4) Shut down engine (TM 9-2320-366-10-1). (5) Check pinion seal for oil leaks. End of Task. CAUTION Grease must flow from all four seals. Failure to comply may result in damage to equipment. NOTE Perform steps (9.1) and (9.2) on bearing cups equipped with tabs.