TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 521 of 1434
TM 9-2320-366-34-2 9-3. FRONT AXLE SHAFT AND SEALS REPLACEMENT This task covers: a. Removal b. Cleaning/Inspection c. Installation d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Wheel bearing/CTIS seal removed (TM 9-2320- 366- 20-4). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Puller, Mechanical (Item 53, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 26, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Respirator, Air Filtering (Item 54, Appendix B) Driver, Front Axle Shaft Seal (Item 48, Appendix D) Materials/Parts Rag, Wiping (Item 60, Appendix C) Seal, Plain Encased (2) (Item 395, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) Grease, Automotive and Artillery (Item 35, Appendix C) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Tag brake hoses and connection points prior to disconnecting. (1) Disconnect two brake hoses (1) from front brake air chamber (2). 9-11