TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 512 of 1434
TM 9-2320-366-34-2 9-4 Change 2 9-2. FRONT AXLE ASSEMBLY REPLACEMENT (CONT) (12) Remove self-locking nut (16), screw (17), and clamp (18) from bracket (19). Discard self-locking nut. (13) Perform steps (7) through (12) on left side of front axle assembly. (14) Remove cotter pin (20), nut (21), and draglink (22) from pivoting arm (23). Discard cotter pin. (15) Lift tabs from two bearing cups (24). (15.1)Remove four screws (25) and two bearing cups (24) from drive yoke (26). Discard screws. (16) Slide drive shaft (27) from side to side and separate universal joint (28) from drive yoke (26). (16.1)Attach drive shaft (27) to crossmember (28.1). NOTE There are two types of bearing cups. those with tabs and those without. Perform the following step on bearing cups with tabs.