TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 510 of 1434
TM 9-2320-366-34-2 Section II. MAINTENANCE PROCEDURES 9-2. FRONT AXLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Gravel deflector and gravel deflector extension removed (TM 9-2320-366-20-4). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Multiplier, Torque Wrench (Item 42, Appendix B) Trestle, Motor Vehicle Maintenance (2) (Item 81, Appendix B) Lift, Transmission/Differential (Item 39, Appendix B) Jack, Dolly Type, Hydraulic (Item 37, Appendix B) Socket, Left Front Leaf Spring U-Bolt (Item 11, Appendix D) Puller Kit, Universal (Item 51, Appendix B) Hammer, Hand, Soft Head (Item 33, Appendix B) Tools and Special Tools (Cont) Puller, Mechanical (Item 53, Appendix B) Sling, Cargo (Item 56, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Nut, Self-Locking (2) (Item 202, Appendix F) Pin, Cotter (2) (Item 328, Appendix F) Nut, Self-Locking (8) (Item 198, Appendix F) Washer (2) (Item 431, Appendix F) Bracket (2, if required) (Item 21, Appendix F) Washer, Brake Housing (2, if required) (Item 436, Appendix F) Screw, Cap (4) (Item 366.1, Appendix F) U-bolt (4) (Item 20.3, Appendix F) Personnel Required (3) WARNING Wear appropriate eye protection when working under vehicle due to possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Deleted. (2) Deleted. 9-2 Change 1