TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 505 of 1434
TM 9-2320-366-34-2 Change 2 8-21 (3.1) Position main housing (6.1) with adapter housing (6) facing up. (3.2) Place straight edge across raised ridge of transmission housing (6). (3.3) Measure dimension “A” between straight edge and top of P3 planetary module (6.2) Record measurement. (3.4) Measure dimension “B” between straight edge and adapter housing flage (6.3). Record measurement. (3.5) Place straight edge across top of transmission shaft adapter (5). (3.6) Measure dimension “C” between straight edge and gasket (4). Record measurement. (3.7) Measure dimension “D” from inside of transmission shaft adapter (5) to straight edge. Record measurement. (3.8) Subtract dimension “B” from dimension “A”. Subtract dimension “D” from dimension “C”. Subtract total from (A-B) and total from (C-D) = dimension “E”. Record measurement.