TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 502 of 1434
TM 9-2320-366-34-2 8-18 Change 2 8-5. TRANSFER CASE MODULE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission mounted on maintenance stand (para 7-5). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Stand, Maintenance, Automotive Engine (TM 9- 2320-366-20) Bracket Assembly, Lift, Transfer Case (Item 24, Appendix D) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Multiplier Torque Wrench (Item 42, Appendix B) Materials/Parts Screw, Hex Head (8) (Item 79, Appendix C) Packing, Preformed (Item 296, Appendix F) Gasket (Item 70, Appendix F) Personnel Required (2) a. Removal. (1) Disconnect hose (1) from 45-degree fitting (2). (2) Remove 45-degree fitting (2) and screen (3) from transfer case module (4). (3) Remove preformed packing (5) from 45-degree fitting (2). Discard preformed packing. (4) Position transfer case lift bracket on transfer case module (4) with eight screws (6). (5) Tighten eight screws (6) to 42-50 lb-ft (57-68 N•m).