TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 494 of 1434
TM 9-2320-366-34-2 8-12 Change 2 8-4. M1086/M1089 INTERMEDIATE FRONT DRIVE SHAFT AND COUPLER BEARING REPLACEMENT/REPAIR (CONT) (3) Remove two self-locking nuts (6), screws (7), and coupler bearing (8) from vehicle. Discard self- locking nuts. (4) Lift tabs from two bearing cups (9). (4.1) Remove four screws (10) and two bearing cups (9) from transfer case yoke (11). Discard screws. (5) Remove intermediate front drive shaft (4) from transfer case yoke (11). (6) Lift tabs from two bearing cups (12). (6.1) Remove four screws (13) and two bearing cups (12) from intermediate front drive yoke (3). Discard screws. (7) Remove universal joint (5) from intermediate front drive yoke (3). (8) Remove two grease fittings (14) from universal joint (5). NOTE Step (3) requires the aid of an assistant. NOTE Perform the following step on bearing cups equipped with tabs. NOTE Perform the following step on bearing cups equipped with tabs.