TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 486 of 1434
TM 9-2320-366-34-2 8-2. TRANSFER CASE CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR (CONT) d. Assembly. WARNING Use care when installing springs. Springs are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (1) Install spring (1) and valve (2) in control valve body (3). (2) Install preformed packings (4 and 5) on solenoid (6). (3) Install solenoid (6) in control valve body (3) with retaining pin (7). (4) Install valve (8), spring (9), and stop (10) in control valve body (3). (5) Install filter element (11) in control valve body (3). (6) Install retaining pin (12) in control valve body (3). e. Installation. (1) Position speed sensor (1) in transfer case module (2) with two bolts (3). (2) Tighten two bolts (3) to 84-120 lb-in. (9-14 N m). (3) Position control valve assembly (4) in transfer case module (2) with six bolts (5). (4) Tighten six bolts (5) to 22-30 lb-ft (30-41 N m). 8-6 Change 1