TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 480 of 1434
TM 9-2320-366-34-2 7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT) NOTE Perform steps (78) and (79) on M1088. (78) Position metal floor plate (82) in platform (83) with two screws (84) and self-locking nuts (85). (79) Tighten two self-locking nuts (85) to 22-28 lb-ft (30-38 N·m). c. Follow-On Maintenance. (1) Install M1089 hydraulic tank, if equipped (TM 9-2320- 366-20-5). (2) Install M1090/M1094 dump body, if equipped (para 15- 10). (3) Install cargo bed, if equipped (para 15-9). (4) Install stationary work lights (TM 9-2320-366-20-3). (5) Install hydraulic pump, if equipped (TM 9-2320-366-20- 5). (6) Install PTO, if equipped (para 16-93). (7) Install intermediate drive shaft (TM 9-2320-366-20-4). (8) Install front drive shaft (TM 9-2320-366-20-4). (9) Service transmission (TM 9-2320-366-20-3). (10) Service transfer case (TM 9-2320-366-20-3). (11) Connect batteries (TM 9-2320-366-20-3). (12) Install spare tire (TM 9-2320-366-10-2). (13) Operate vehicle and check transmission for oil leaks. (14) Check exhaust pipe for exhaust leaks, excessive noise, and vibration. End of Task. 7-134 Change 1