TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 478 of 1434
TM 9-2320-366-34-2 7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT) NOTE Perform steps (64) through (69) on vehicles equipped with transmission oil cooler hoses. (64) Install two preformed packings (64 and 69) on 90- degree fittings (65 and 66). (65) Position 90-degree fittings (65 and 66) on transmission (2). (66) Tighten jam nuts (67) on fittings (65 and 66). (67) Position transmission oil cooler hose (62) on 90- degree fitting (65). (68) Position transmission oil cooler hose (68) on 90- degree fitting (66). (69) Tighten transmission oil cooler hoses (62 and 68) to 94-104 lb-ft (127-141 N·m). NOTE • Perform steps (70) and (71) on vehicles equipped with transmission oil cooler hoses. • Steps (70) and (71) require the aid of an assistant. (70) Position lower helilift support crossmember (70) on vehicle with four bolts (71) and self-locking nuts (72). (71) Tighten four self-locking nuts (72) to 295-369 lb-ft (400-500 N·m). 7-132 Change 1