TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 473 of 1434
TM 9-2320-366-34-2 Change 2 7-127 (27) Position six bolts (22) in flexplate (23). (28) Tighten six bolts (22) to 25-29 lb-ft (34-39 N • m). (29) Install plug (24) in flywheel housing (25). (30) Position 12 bolts (26) in flexplate (23). (31) Tighten 12 bolts (26) to 18-22 lb-ft (24-30 N • m). (32) Position gasket (27) and flywheel cover (28) on flywheel housing (25) with four washers (29), and screws (30). (33) Position gasket (27), flywheel cover (28), transmission oil cooler hose bracket (31) on flywheel NOTE • Perform steps (27) through (29) on vehicle serial numbers 1478 and higher. • Steps (27) and (28) require the aid of an assistant. • During installation of flexplate bolts, access each flexplate bolt by turning alternator pulley through a series of short arcs. NOTE • Steps (30) and (31) require the aid of an assistant. • During installation of flexplate bolts, access each flexplate bolt by turning alternator pulley through a series of short arcs. NOTE Perform step (32) on vehicles equipped with transmission oil cooler tubes. NOTE Perform step (33) on vehicles equipped with transmission oil cooler hoses.