TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 466 of 1434
TM 9-2320-366-34-2 7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT) NOTE Perform steps (42) and (43) on vehicle serial numbers 7162 and higher. (42) Remove plug (66) from flywheel housing (62). NOTE • Step (43) requires the aid of an assistant. • During removal of flexplate bolts, access each flexplate bolt by turning alternator pulley through a series of short arcs. (43) Remove six bolts (67) from flexplate (65). (44) Remove five bolts (68) from adapter housing module (69). NOTE Transmission lifting bracket is installed with lift eye top-dead-center facing forward. (45) Position transmission lifting bracket on adapter housing module (69) with five bolts (68). (46) Tighten five bolts (68) to 42-50 lb-ft (57-68 N·m). 7-120 Change 1