TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 460 of 1434
TM 9-2320-366-34-2 7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT) CAUTION Cap or plug hydraulic connections to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE • Vehicle serial numbers 0001 through 7161 may have transmission oil cooler tubes installed. Vehicle serial numbers 7162 and higher will have transmission oil cooler hoses installed. • Tag hoses, tubes, and connection points prior to disconnecting. • Perform steps (8) through (11) on vehicles equipped with transmission oil cooler tubes. (8) Disconnect transmission oil cooler hose (18) from 90- degree fitting (19). (9) Disconnect transmission oil cooler tube (20) from 90- degree fitting (21). (10) Loosen jam nuts (22) on 90-degree fittings (19 and 21). NOTE Note position of 90-degree fittings prior to removal. (11) Remove 90-degree fittings (19 and 21) from transmission (11). (12) Remove preformed packings (23) from 90-degree fittings (19 and 21). Discard preformed packings. 7-114 Change 1