Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 454 of 1434

TM 9-2320-366-34-2 7-17. ENGINE AND TRANSMISSION MOUNT BRACKET REPLACEMENT (CONT) (6) Install exhaust pipe (8) and clamp (9) to rear of turbocharger (10). (7) Position self-locking nut (11) on clamp (9). (8) Tighten self-locking nut (11) to 89-109 lb-in. (10-12 N·m). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (9) Apply light coat of sealing compound to threads of two bolts (12). (10) Position exhaust pipe bracket (13) on RH engine and transmission mount bracket (1) with two bolts (12). 7-108 Change 1