TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 451 of 1434
TM 9-2320-366-34-2 (4) Remove two bolts (5) from exhaust bracket (6). (5) Remove self-locking nut (7) from clamp (8). Discard self-locking nut. (6) Remove exhaust pipe (4) from rear of turbocharger (9). (7) Remove clamp (8) from exhaust pipe (4). NOTE Hydraulic jack is used to support engine and transmission while RH engine mount and transmission bracket is being replaced. (8) Position hydraulic jack with 8 in. (20 cm) wooden block under transmission control valve module (9). (9) Raise hydraulic jack to apply pressure to transmission (10). Change 1 7-105