TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 450 of 1434
TM 9-2320-366-34-2 7-17. ENGINE AND TRANSMISSION MOUNT BRACKET REPLACEMENT (CONT) NOTE Perform steps (8) and (9) on M1089. (8) Position three hoses (7) on three stage hydraulic manifold (8). (9) Tighten three hoses (7) to 148-161 lb-ft (201-218 N·m). (10) Remove hydraulic jack and wooden block from under transmission control valve module (9). c. RH Removal. WARNING Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. (1) Remove self-locking nut (1) from clamp (2). Discard self-locking nut. (2) Remove exhaust pipe (3) from exhaust pipe (4). (3) Remove clamp (2) from exhaust pipe (3). 7-104 Change 1