TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 449 of 1434
TM 9-2320-366-34-2 b. LH Installation. (1) Position LH engine and transmission mount bracket (1) on transmission (2) and engine (3) with four bolts (4). (2) Position two bolts (5) in top of LH engine and transmission mount bracket (1). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (3) Apply light coat of sealing compound to threads of four bolts (6). (4) Position four bolts (6) on front of LH engine and transmission mount bracket (1). (5) Tighten four bolts (6) to 330-378 lb-ft (447-513 N·m). (6) Tighten two bolts (5) to 76-94 lb-ft (103-127 N·m). (7) Tighten four bolts (4) to 129-159 lb-ft (175-215 N·m). Change 1 7-103