TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 440 of 1434
TM 9-2320-366-34-2 7-14. CONTROL VALVE MODULE STRAINER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Condition Control valve module removed (para 7-10). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Tools and Special Tools (Cont) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Seal (Item 375, Appendix F) Gasket (Item 63, Appendix F) Strainer, Suction (Item 428, Appendix F) a. Removal. NOTE Perform step (1) on serial numbers prior to 6510032369. (1) Remove four bolts (1) from housing (2). NOTE Perform step (2) on serial number 6510032369 and higher. (2) Remove three bolts (1) from housing (2). (3) Remove housing (2) from channel plate (3). (4) Remove strainer (4) from channel plate (3). Discard strainer. (5) Remove gasket (5) from channel plate (3). Discard gasket. (6) Remove seal (6) from housing (2). Discard seal. 7-94