TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 425 of 1434
TM 9-2320-366-34-2 7-11. CONTROL VALVE MODULE REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Condition Transmission internal wiring harness removed (para 7-13). Tools/Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Tools and Special Tools (Cont) Gloves, Rubber (Item 26, Appendix B) Materials/Parts Solvent, Dry Cleaning (Item 83, Appendix C) Rag, Wiping (Item 60, Appendix C) Honing Stone Assembly (Item 39, Appendix C) Cloth, Abrasive (Item 22, Appendix C) Gasket (Item 64, Appendix F) a. Disassembly. (1) Remove two bolts (1) and turbine speed sensor (2) from main valve body (3). (2) Remove eight bolts (4) and stationary clutch valve body (5) from main valve body (3). (3) Remove three bolts (6) and rotating clutch valve body (7) from main valve body (3). (4) Remove five bolts (8) and C6 clutch valve body (9) from channel plate (10). 7-79