TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 406 of 1434
TM 9-2320-366-34-2 7-8. ROTATING CLUTCH SOLENOID ASSEMBLY REPLACEMENT/REPAIR (CONT) (3) Remove two screws (4) and pressure switch (5) from rotating clutch valve body (2). (4) Remove preformed packing (6) from pressure switch (5). Discard preformed packing. WARNING Use care when removing springs. Springs are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. CAUTION Retaining pins are removed from the bottom of solenoid body. Failure to comply may result in damage to equipment. (5) Remove retaining pin (7), solenoid (8), regulator valve (9), and spring (10) from rotating clutch valve body (2). (6) Remove preformed packings (11 and 12) from solenoid (8). Discard preformed packings. (7) Perform steps (5) and (6) on remaining two solenoids (8). 7-60