TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 405 of 1434
TM 9-2320-366-34-2 7-8. ROTATING CLUTCH SOLENOID ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission internal wiring harness removed (para 7- 13). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 25, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Rag, Wiping (Item 60, Appendix C) Seal, Non-Metallic (Item 375, Appendix F) Filter Element (3) (Item 32, Appendix F) Packing, Preformed (Item 297, Appendix F) Packing, Preformed (2) (Item 298, Appendix F) Packing, Preformed (2) (Item 300, Appendix F) Packing, Preformed (Item 293, Appendix F) Packing, Preformed (Item 299, Appendix F) Solvent, Dry Cleaning (Item 83, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) a. Removal. (1) Remove three bolts (1) from rotating clutch valve body (2). (2) Remove rotating clutch valve body (2) from main valve body (3). b. Disassembly. NOTE Rotating clutch solenoid assembly contains parts which cannot be interchanged. Tag all parts prior to removal. (1) Remove seal (1) from rotating clutch valve body (2). Discard seal. (2) Remove three solenoid filter screens (3) from rotating clutch valve body (2). Discard solenoid filter screens. 7-59