TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 403 of 1434
TM 9-2320-366-34-2 NOTE Replace any part that fails visual inspection, size measurements requirements, or resistance checks. (2) Inspect clutch valve body (1) for cracks, burrs, grooves, distortion, scoring, excessive wear, or varnish buildup. (3) Measure resistance of three solenoids (2), resistance should be between 2.0 - 5.0 ohms. d. Assembly. WARNING Use care when installing valve body parts retained by retaining pins. Valve body parts are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. CAUTION Retaining pins must be installed from bottom of solenoid body. Failure to comply may result in damage to equipment. (1) Install three preformed packings (1 and 2) on solenoids (3). (2) Install three springs (4), regulating valves (5), solenoids (3), and retaining pins (6) in clutch valve body (7). 7-57