TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 401 of 1434
TM 9-2320-366-34-2 7-7. STATIONARY CLUTCH SOLENOID ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission internal wiring harness removed (para 7- 13) Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 26, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Rag, Wiping (Item 60, Appendix C) Filter Element (3) (Item 32, Appendix F) Seal, Non-Metallic (2) (Item 375, Appendix F) Packing, Preformed (3) (Item 298, Appendix F) Packing, Preformed (3) (Item 300, Appendix F) Solvent, Dry Cleaning (Item 83, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) a. Removal. Remove eight screws (1) and clutch valve body (2) from main valve body (3). b. Disassembly. NOTE Stationary clutch solenoid contains parts which cannot be interchanged. Tag all parts prior to removal. (1) Remove two face seals (1) from clutch valve body (2). Discard face seals. (2) Remove three filter screens (3) from clutch valve body (2). Discard filter screens. 7-55