TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 385 of 1434
TM 9-2320-366-34-2 NOTE Perform steps (80) through (83) on transmission serial numbers prior to 6510032369. (80) Remove bolt (89) from transmission (1). (81) Position clamp (90) on transmission (1) with bolt (89). (82) Tighten bolt (89) to 42-50 lb-ft (57-68 N·m). (83) Install clamp (91) on transmission (1) with bolt (92) and self-locking nut (93). CAUTION Due to position of main housing module connector, extreme care must be taken when installing pigtail adapter connector. Failure to comply may result in damage to equipment. NOTE • Transmissions with serial numbers lower than 6510032369 require the use of a transmission adapter harness (part number 29519210) to adapt to the transmission external wiring harness. Transmissions with serial numbers higher than 6510032369 do not require the use of a transmission adapter harness. • Install plastic cable ties as required. (84) Position transmission adapter harness (94) in main housing module receptacle (95) with connector bolt (96). (85) Tighten connector bolt (96) to 12-24 lb-in. (1-3 N·m). Change 1 7-39