TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 384 of 1434
TM 9-2320-366-34-2 7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT) NOTE • Perform steps (73) and (74) on vehicle serial number 0001 through 1477. • Steps (73) and (74) require the aid of an assistant. • During installation of flexplate bolts, access each flexplate bolt by turning alternator pulley through a series of short arcs. (73) Position 12 bolts (80) in flexplate (77). (74) Tighten 12 bolts (80) to 18-22 lb-ft (24-30 N·m). NOTE Perform step (75) and (76) on vehicles equipped with transmission oil cooler tubes. (75) Position gasket (81) and flywheel cover (82) on flywheel housing (79) with four washers (83) and screws (84). NOTE Perform step (76) on vehicles equipped with transmission oil cooler hoses. (76) Install gasket (81), flywheel cover (82), and transmission oil cooler hose bracket (85) on flywheel housing (79) with four washers (83) and screws (84). (77) Tighten four screws (84) to 22-26 lb-ft (30-35 N·m). (78) Position oil fill hose (86) on oil fill tube (18) and tube (87) with two clamps (88). (79) Tighten two clamps (88) to 24-48 lb-in. (3-5 N·m). 7-38 Change 1