TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 383 of 1434
TM 9-2320-366-34-2 NOTE Perform steps (67) through (69) on models M1084, M1086, M1090, and M1094. (67) Remove bolt (73) from transfer case housing (74). (68) Position bracket (75) on transfer case housing (74) with bolt (73). (69) Tighten bolt (73) to 44-55 lb-ft (59-74 N·m). NOTE • Perform steps (70) through (72) on vehicle serial number 1478 and higher. • Steps (70) and (71) require the aid of an assistant. • During installation of flexplate bolts, access each flexplate bolt by turning alternator pulley through a series of short arcs. (70) Position six bolts (76) in flexplate (77). (71) Tighten six bolts (76) to 37-45 lb-ft (51-61 N·m). (72) Install plug (78) in flywheel housing (79). Change 1 7-37