Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 378 of 1434

TM 9-2320-366-34-2 7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT) NOTE Perform steps (34) through (41) on M1089. (34) Position three hoses (38) on three stage hydraulic pump (39). (35) Tighten three hoses (38) to 79-88 lb-ft (107-119 N·m). WARNING Three stage hydraulic pump weighs approximately 70 lbs (32 Kgs). Attach suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (36) requires the aid of an assistant. (36) Install three stage hydraulic pump (39) on PTO (31) with four washers (40) and nuts (41). (37) Remove two nuts (42) and washers (43) from three stage hydraulic pump (39). (38) Position support bracket (44) on three stage hydraulic pump (39) with two washers (43) and nuts (42). (39) Position three bolts (45) in support bracket (44). (40) Tighten three bolts (45) to 66-81 lb-ft (90-110 N·m). (41) Tighten two nuts (42) to 180-200 lb-ft (243-297 N·m) in 50 lb-ft (68 N·m) increments. 7-32 Change 1