TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 376 of 1434
TM 9-2320-366-34-2 7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT) NOTE Perform steps (22) and (23) if pressure plate assembly was removed from transmission serial numbers prior to 6510032369. (22) Position pressure plate assembly (24) on transmission (1) with 20 bolts (25). (23) Tighten 20 bolts (25) to 18-22 lb-ft (24-30 N·m). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (24) Apply light coat of sealing compound to seating surface (26) on transmission (1). (25) Install gasket (27) on transmission (1). NOTE Perform step (28) on vehicles equipped with transmission oil cooler tubes. (26) Connect transmission oil cooler hose (28) to fitting (29). 7-30 Change 1