TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 367 of 1434
TM 9-2320-366-34-2 NOTE • Perform step (87) on vehicles equipped with hydraulic rotary pump. • Step (87) requires the aid of an assistant. (87) Remove two screws (116), washers (117), and hydraulic rotary pump (118) from PTO (119). NOTE Perform steps (88) through (92) on M1089. (88) Remove three bolts (120) from support bracket (121). (89) Remove two nuts (122), washers (123) and support bracket (121) from three stage hydraulic pump (124). (90) Install two washers (123) and nuts (122) on three stage hydraulic pump (124). WARNING WARNING Three stage hydraulic pump weighs approximately 70 lbs (32 Kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (91) requires the aid of an assistant. (91) Remove four nuts (125), washers (126), and three stage hydraulic pump (124) from Power Take-Off (PTO) (119). (92) Remove three hoses (127) from three stage hydraulic pump (124). Change 1 7-26.15