TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 358 of 1434
TM 9-2320-366-34-2 7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT) (34) Loosen two clamps (46) on tube (47) and oil fill hose (48). (35) Remove oil fill hose (48) from oil fill tube (49) and tube (47). NOTE Perform step (36) on vehicles equipped with transmission oil cooler tubes. (36) Remove four screws (50), washers (51), flywheel cover (52), and gasket (53) from flywheel housing (54). Discard gasket. NOTE Perform step (37) on vehicles equipped with transmission oil cooler hoses. (37) Remove four screws (50), washers (51), transmission oil cooler hose bracket (55), flywheel cover (52), and gasket (53) from flywheel housing (54). Discard gasket. NOTE • Perform step (38) on vehicle serial number 0001 through 1477. • Step (38) requires the aid of an assistant. • During removal of flexplate bolts, access each flexplate bolt by turning alternator pulley through a series of short arcs. (38) Remove 12 bolts (56) from flexplate (57). 7-26.6 Change 1