TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 345 of 1434
TM 9-2320-366-34-2 7-3. TRANSMISSION UNPACKING/PACKING This task covers: a. Unpacking b. Packing INITIAL SETUP Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Sling, Multiple Leg (TM 9-2320-366-20) Transmission, Lifting Bracket (Item 27, Appendix D) Sling, Engine and Transmission, Motor Vehicle (Item 57, Appendix B) Materials/Parts Desiccant (5) (Item 25, Appendix C) Gasket (Item 59, Appendix F) Lockwasher (28) (Item 141, Appendix F) Personnel (2) a. Unpacking. WARNING Ensure all pressure is released from container. Failure to comply may result in injury to personnel. (1) Depress and hold air release button (1) on transmission shipping and storage container breather valve (2) until all pressure is released. WARNING Storage container cover weighs approximately 130 lbs (59 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. (2) Remove 28 screws (3), washers (4), and nuts (5) from stowage container cover (6). (3) Lift stowage container cover (6) from stowage container base (7). (4) Remove gasket (8) from stowage container base (7). Discard gasket. 7-19