TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 343 of 1434
TM 9-2320-366-34-2 Change 2 7-17 (11) Position shim (3), recessed side down, in torque converter module (1) with bolt (4). (12) Tighten bolt (4) to 66-81 lb-ft (89-110 N • m). (13) Install retainer packing (5) on converter end plug (6). (14) Install converter end plug (6), flat side up, in torque converter module (1) with retaining ring (7). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. NOTE Perform steps (13) and (14) on transmissions prior to S/N 6510165560.