TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 340 of 1434
TM 9-2320-366-34-2 7-2. TORQUE CONVERTER REPLACEMENT/REPAIR (CONT) (3) Remove lifting device from chain. (4) Remove two bolts, washers, and chain from torque converter module (1). (5) Position profile gage in torque converter module (1) with profile gage bolt. (6) Tighten profile gage bolt to 18-22 lb-ft (24-30 N m). NOTE Refer to Table 7-2 Torque Converter End Play Shim Chart for correct shim thickness. (7) Measure dimension "A", constant tool height should be 3.937 in. (10 cm). Record measurement. (8) Measure dimension "B". Record measurement. (9) Subtract dimension "B" from dimension "A" (constant tool height) to determine dimension "C" (A - B = C). 7-16